StealthWriter

Humanize AI Text. Make Every Edit Yours.

Paste an AI-written essay, report or article draft — the full document, not just a paragraph. StealthWriter rewrites it into natural prose and shows the result beside your original, so you can check every change before you keep it.

Original Text

Writing mode
150 free words0 words · 0 / 50,000 characters

Loading...

Humanized Text

Your humanized text will appear here…

Restate an existing thesis →

See an edit before trying your own

Compare two recorded StealthWriter results from separate runs on different fictional inputs. Opening a comparison does not rewrite text or use your word balance.

Academic paragraph: before and after

StealthWriter result · Standard · October 8, 2026
Fictional input from one recorded run. The output is unedited.

Original draft

In a fictional library pilot, 12 volunteers tried the revised catalogue for one afternoon. One participant wrote, "The labels were easier to scan, but I still needed help." This quotation belongs to that participant, not the whole group [Pilot note A, fictional]. There is a need to point out that 8 volunteers completed the lookup task without help. Completion time was not recorded, and the pilot used no comparison group. The team may test a revised index later, but has not approved another session.

StealthWriter result

In a fictional library pilot, 12 volunteers tested the revised catalogue over the course of one afternoon. One participant wrote, “The labels were easier to scan, but I still needed help.” This quotation reflects only that participant’s experience, not the views of the entire group [Pilot note A, fictional]. It is important to note that 8 volunteers completed the lookup task without assistance. Completion times were not recorded, and the pilot did not include a comparison group. The team may test a revised index at a later date, but no additional session has been approved.

The numbers, quoted sentence and limits of the fictional pilot are preserved. The result is longer (84 to 95 words) and keeps “It is important to note that”, which still needs editing. Compare it with the original before using it.

Content review paragraph: before and after

StealthWriter result · Standard · October 21, 2026
Fictional input from one recorded run. The output is unedited.

Original draft

In this fictional content review, 14 editors checked 42 product pages. It is worth mentioning that five pages needed clearer headings. One editor wrote, "The wording is accurate." The review did not measure sales. A second review may happen next month if approved; no session is booked.

StealthWriter result

In this fictional content review, 14 editors checked 42 product pages. Five pages needed clearer headings. One editor wrote, "The wording is accurate." The review did not measure sales. A second review may happen next month if approved; no session has been booked.

The recorded result removes “It is worth mentioning that” (47 to 43 words). It preserves the counts, quoted sentence, lack of sales measurement, and the possible follow-up that still requires approval and has not been booked. Review the meaning and conditions before using a rewrite.

In one sentence: document import lets the editor take a shared Google Docs link or an uploaded DOCX, DOC, PDF or TXT file — up to 8 MiB — and turns it into plain text in the rewrite box, so the unit a writer can rewrite is a whole document rather than a pasted fragment. It is an input method, not a detector or a formatting tool: the rewrite returns wording, and the text of the document is what the word balance is charged on.

What the import does

  • Reads a Google Docs link that the owner has shared as “Anyone with the link — Viewer”, up to 200,000 characters of text.
  • Reads an uploaded DOCX, DOC, PDF or TXT file up to 8 MiB; DOCX and PDF are parsed in the browser, TXT is decoded directly and legacy .doc is extracted approximately.
  • Places the extracted text in the editor, where it is rewritten, compared with the original and copied out like any pasted text.
  • Keeps the source out of storage: the Google Doc’s text is returned to the browser and not stored, and an uploaded file never leaves the browser.

What it does not do

  • It does not preserve formatting: headings, bold and italic, tables, images, comments, footnotes and page layout are dropped on import, and a rewrite returns wording only.
  • It does not read a private Google Doc, a Google Doc behind a sign-in, a scanned PDF without a text layer, or any file type other than DOCX, DOC, PDF and TXT.
  • It does not scan for AI-generated text and does not report a detector score — the product rewrites wording and makes no claim about any third-party detector.
  • It does not rewrite a document longer than one request in a single pass: one request covers up to 50,000 characters, and longer documents are rewritten section by section in the long-text workspace.

Limits at a glance

  • Upload size: 8 MiB per file; 200,000 characters of extracted text.
  • Google Doc: 200,000 characters; document must be link-shared for viewing.
  • One rewrite request: up to 50,000 characters; the long-text workspace holds a draft of up to 200,000 characters and works in sections of 100, 300 or 600 words.
  • Charge: per input word, counted when a rewrite is submitted — the import itself does not use the balance.
  • Access: the import entry is part of the paid plans; without a subscription the button shows the plan cards.

Where the import sits in the workflow

A writer who already has the document does not start from an empty box. The order is: bring the text in once — link or upload — choose the tone for the whole draft, rewrite, and then read the result against the original before anything is kept. The comparison stays visible the entire time, and the rewrite that gets submitted is what lands in the account’s history, where it can be deleted. The formatted document stays the master copy; the editor works on the words.

Plans and word allowances are on the pricing page; the section-by-section workspace is described on the long-text page.

Frequently asked

What is document import?
Document import is the editor’s second input path. Instead of pasting text, the writer supplies a document — a shared Google Docs link, or a DOCX, DOC, PDF or TXT file up to 8 MiB — and the editor receives its plain text, ready to be rewritten in the same box where pasted text would go. The document is a way in, not a separate product: the rewrite, the side-by-side comparison and the per-word charge work exactly as they do for pasted text.
Which documents can be imported, and which cannot?
A Google Docs link works when the document is shared as “Anyone with the link — Viewer” and is up to 200,000 characters; a private document is reported as not public and is not read. Uploads accept DOCX, DOC, PDF and TXT up to 8 MiB. DOCX and PDF are parsed in the browser, TXT is decoded directly, and a legacy .doc is extracted approximately because the format has no reliable text layer. A scanned PDF with no text layer, and any other file type, cannot be imported.
What are the limits of a single import?
An uploaded file may be up to 8 MiB and an imported document up to 200,000 characters of text. One rewrite request then covers up to 50,000 characters, and credits are charged on the words submitted for rewriting, not on the import. A document longer than one request is rewritten section by section in the long-text workspace, which keeps one draft of up to 200,000 characters and works in sections of 100, 300 or 600 words.
Does importing a document keep its formatting?
No. Import preserves text, not structure: bold and italic marks, headings, tables, images, comments, footnotes and page layout are dropped, and the rewrite returns wording, not formatting. The practical workflow is to keep the formatted original and paste the rewritten text back into it, or to rewrite one section at a time and replace only that section.
Who can import a document, and where does the document go?
The import entry is available to accounts on a paid plan; without a subscription the button shows the plan cards. A Google Doc is fetched, returned to the browser and not stored — the link and its text are not logged. An uploaded file is parsed inside the browser and never uploaded. Only text submitted for rewriting is saved, in the account’s own history, where the writer can delete it, and the site states that submitted text is not used to train a model of its own.

Write for your reader.

Use a rewrite to explore clearer wording and a tone that fits your audience. Compare the result with your original and check facts before you publish. StealthWriter does not guarantee AI detector scores or search rankings.

Try 150 free words →

What are you working on?

A new essay draft

Start from a topic and your notes, or draft a conclusion from an existing thesis and body points. This separate writing tool uses the same word balance.

Open Essay Writer →

How to Humanize AI Text with StealthWriter?

Open the editor, choose a tone, and compare the suggested wording with your original. Check facts, numbers and commitments before you use or publish the draft.

1

Visit our AI Humanizer online tool.

2

Input or paste the AI-generated text into the designated area.

3

Click the "Humanize" button and wait for the output to appear.

4

Review the rewritten draft next to your original. Check facts, numbers and meaning before using the result.

How an AI humanizer works

A humanizer does not look for a hidden marker in the text and switch it off. It rewrites at the level of wording: which word is chosen, how clauses are ordered, how long each sentence runs, and where a paragraph breaks. The output is generated from your text, so each sentence is newly written rather than produced by a substitution table applied to the old one.

That is why two runs on the same paragraph come back different, and why a rewrite can read more naturally while still being wrong about a fact. It is also why no humanizer can honestly promise a particular score on a particular detector: the wording changes, the detector’s model does not.

StealthWriter checks every result against the text you submitted before returning it. If a number, link or email address in the rewrite does not match your original, the result is rejected and no words are used. That check covers those three things and nothing else — it does not verify whether a claim is true.

What a rewrite changes and what it must not change
What a rewrite changesWhat it must not change
Word choiceNumbers and dates
Sentence lengthLinks and email addresses
Clause orderThe meaning of a claim
How a paragraph flowsWhich sources you cite

The practical test is a side-by-side read. Does every sentence in the rewrite still say what your sentence said, and is the wording something you would actually write? Anything that fails either half should be edited back before you use the result.

Who uses an AI text humanizer?

Our AI text humanizer online tool helps writers explore natural wording that fits their audience, especially:

  • •Content creators and bloggers can use it to refine AI-assisted drafts into engaging articles they can review and adapt.
  • •Marketing agencies and website builders can revise client articles, landing-page copy and product descriptions, then verify claims against the brief.
  • •Students and research writers can revise existing essay and research drafts, then check citations, technical terms and the rules for AI assistance.

With StealthWriter, writers can explore clearer wording while keeping responsibility for the final draft.

Frequently Asked Questions

What does an AI humanizer do?

StealthWriter rewrites a draft to explore different wording, sentence flow and tone. Review the result against your original, especially names, numbers and technical terms.

Can I try StealthWriter for free?

Yes. Sign in or create an account to use the humanizer. New accounts receive 150 words to try it. Rewriting uses your word balance; paid plans provide additional words. No payment is needed for the initial 150 words.

Can I rewrite more than 150 words?

Yes, if your account has enough words available. Each request accepts up to 50,000 characters; longer drafts may need to be split into smaller sections so the rewrite can finish. The 150 words are the initial signup allowance.

Which tone should I choose?

Start with Standard for a general draft, Simple for plainer language, or Formal for a more reserved style. Review any changes to your meaning before using the output.

Will a rewrite pass an AI detector?

We do not guarantee a detector result. A rewrite is an editing suggestion, not proof of authorship or a substitute for checking facts. Follow the AI-use and disclosure rules that apply to your work.

Can I paste text from different AI tools?

You can paste text into the editor regardless of which tool produced it. No connection to the original AI account is required. Results vary with the input, language and selected tone.

What should I check before publishing?

Compare facts, quotations, links and commitments with the source. Keep the wording that best communicates your meaning, and add your own expertise and verified details where they help the reader.

How much does StealthWriter cost?

Basic costs US$9.90 per month for 15,000 words, Pro US$18 for 50,000 words, and Ultra US$36 for unlimited words. Basic is the entry plan. Yearly billing is available on every plan, and each plan uses the same account balance across the Humanizer, the long-text workspace and Essay Writer.

Is there a free AI humanizer?

Yes. A new account receives 150 free words once after sign-in, shared across the Humanizer, the long-text workspace and Essay Writer. No payment method is required for those words, and it is not a monthly free quota.

How is this different from a paraphrasing tool?

A paraphrasing tool usually swaps words for synonyms. StealthWriter rewrites a draft to change wording, sentence flow and tone while leaving numbers, links and email addresses unchanged, then shows the result beside your original so you can compare every change before using it.

Which languages does StealthWriter support?

The interface is available in 14 languages: English, Arabic, Chinese (Simplified), Korean, Japanese, Spanish, Portuguese, French, German, Turkish, Italian, Vietnamese, Thai and Hindi. The editor has no translation option: a rewrite stays in the language of the text you paste.

What is StealthWriter?

StealthWriter is an AI text humanizer at stealthwriter.me, operated by AI CO WEALTH LTD; it rewrites AI-written drafts, short passages or whole documents section by section, into more natural wording and tone while leaving numbers, links and email addresses unchanged. It does not translate, and it does not guarantee an AI-detector result.

When should I use StealthWriter?

When you already have a draft and want different wording or a different tone while the facts stay put. Typical cases: rewording your own text, adjusting a paragraph for a different reader, and cleaning up an AI-assisted draft that you will check yourself. Paste the text, choose a tone, and compare every change against the original before you use it.

When is StealthWriter not the right tool?

It is not a translator, a fact checker or a citation generator, and it makes no claim about how a draft will be scored by automated text-screening tools. It does not write a draft from a prompt (Essay Writer drafts in English only), it does not verify whether a claim is true, and it rejects any rewrite that changes a number, link or email address, so if a figure genuinely has to change you edit it yourself.

How much does StealthWriter cost per 1,000 words?

Basic is US$9.90 a month for 15,000 shared word credits (US$0.66 per 1,000 credits), and Pro is US$18 a month for 50,000 (US$0.36 per 1,000). On annual billing, Basic is US$54 for 180,000 credits (US$0.30 per 1,000) and Pro is US$108 for 600,000 (US$0.18 per 1,000). Ultra is listed with an unlimited word allowance, so no per-1,000 rate is quoted; request and tool limits still apply. Humanizer and long-text rewrites use the words you submit; a completed Essay Writer draft uses its selected 100-, 300-, or 600-word target. All three use the same balance.

Can I rewrite a whole essay?

Yes, if your draft fits the regular Humanizer's 50,000-character input limit and you have enough word credits, you can submit it in one request. That input limit does not guarantee a particular request will finish; compare any result with your original. For a longer draft or closer section-by-section review, the long-text workspace accepts up to 200,000 characters per draft and rewrites one selected section of about 100, 300 or 600 words per request. Successful rewrites use the submitted input words. One pass over 2,000 words needs about 2,000 credits, so the one-time 150 free words will not cover that example.

Who can see the text I paste?

Your draft is sent to our AI provider only to generate the rewrite, and a successful signed-in rewrite is saved in your account history. Saved results stay until you delete them in the tool or request account deletion. Your account email and payment details are not included in provider requests, and we never sell or rent personal information.